Sharp MX 3501N - Color Laser - Copier, Service Manual

Page: 162 / 448

MX3500N SIMULATION 7 – 54
<Set range and default value of each setup>
* On adjustment values
Each temperature correction value
→
Temperature 1
°
C change
by 1 count
Each paper exit count
→
1 sheet by 1 count
Each cool-down time
→
1s change by 1 count
<Code descriptions of the above list>
43-31
Purpose Operation check
Function (Purpose) Used to check the operation of the fusing
web cleaning motor.
Section Fusing
Item Operation
Operation/Procedure
1) Remove the fusing unit.
2) Enter the simulation mode with the door open, and press
[EXECUTE] button.
3) Perform the fusing web cleaning motor drive (continuous rota-
tion for 10 sec). After completion, "COMPLETE" is displayed.
Item Display items Item descriptions
Set
range
Default
value
A NN_120_ WUP_HL_UM&HL_E WARMUP end temperature
correction value 120
°
C or below when turning
on the power under NN
environment
Item Sim. 43-1-A, C 1 to 99 50
B NN_120_WUP_HL_LM Item Sim. 43-1-B 1 to 99 50
C LL_120_ WUP_HL_UM&HL_E 120
°
C or below when turning
on the power under LL
environment
Item Sim. 43-20-A, C 1 to 99 55
D LL_120_WUP_HL_LM Item Sim. 43-20-B 1 to 99 60
E HH_120_ WUP_HL_UM&HL_E 120
°
C or below when turning
on the power under HH
environment
Item Sim. 43-21-A, C 1 to 99 50
F HH_120_WUP_HL_LM Item Sim. 43-21-B 1 to 99 50
G ON_120_WUP_HL_UM Temperature correction value
immediately after completion of
warm-up and during continuation
of temperature correction 120
°
C or below when turning
on the power
Item Sim. 43-1-A 1 to 99 60
H ON 120 WUP HL_E Item Sim. 43-1-C 1 to 99 55
I NN_120_ FUS_DUP_HL_UM & HL_E Fusing temperature correction
value 120
°
C or below when turning
on the power under NN
environment
Item Sim. 43-4-A, C,
E, G 1 to 99 55
J NN_120_ FUS_DUP_HL_LM Item Sim. 43-4-B, F 1 to 99 50
K LL_120_ FUS_DUP_HL_UM&HL_E 120
°
C or below when turning
on the power under LL
environment
Item Sim. 43-22-A,
C, E, G 1 to 99 60
L LL_120_ FUS_DUP_HL_LM Item Sim. 43-22-B, F 1 to 99 50
M HH_120_ FUS_DUP_HL_UM&HL_E 120
°
C or below when turning
on the power under HH
environment
Item Sim. 43-23-A,
C, E, G 1 to 99 50
N HH_120_ FUS_DUP_HL_LM Item Sim. 43-23-B, F 1 to 99 50
O NN_120_ FUS_DUP_CNT Fusing duplex paper exit count Applicable number of sheets for SIM43-24-I, J (NN
environment)
1 to 60 5
P LL_120_ FUS_DUP_CNT Applicable number of sheets for SIM43-24-K, L (LL
environment)
1 to 60 10
Q HH_120_ FUS_DUP_CNT Applicable number of sheets for SIM43-24-M, N (HH
environment)
1 to 60 5
R COOL_DOWN_HEAVY Cool-down time Cool-down time (Heavy paper
→
Ready) 1 to 60 15
S COOL_DOWN_OHP Cool-down time (OHP
→
Ready) 1 to 60 30
T COOL_DOWN_DEVELOP Cool-down time (Envelope
→
Ready) 1 to 60 40
U WUP DUP TIME Temperature correction
continuation time immediately
after completion of warm-up Applicable time for SIM43-24-G, H (Timer from
completion of ready)
0 to 255 120
V FUS MOTOR Fusing web motor operation
interval Web motor operation interval 1 to 20 6
TH_UM Fusing upper thermister MAIN center
TH_LM Fusing lower thermister MAIN
TH_E Fusing thermister external
HL_UM Heater lamp upper MAIN
HL_LM Heater lamp lower MAIN
HL_E Heater lamp external
0
A:
A 㧦 50
B 㧦 50
C 㧦 50
D
㧦
50
㧧
NN_120_ WUP_HL_UM&HL_E
㧧
NN_120_WUP_HL_LM
㧧 LL_120_ WUP_HL_UM 㧒 HL_E
㧧
LL_120_WUP_HL_LM
SIMULATION NO.43.-24
FUSER TEMP RESET
50
㨇 1 㨪 99 㨉
OK
TEST
CLOSE
SIMULATION NO.43-31
TEST
FUSER WEB CLEANING CHECK
1/1
0
CLOSE
EXECUTE