manualshive.com logo in svg

Sharp MX 3501N - Color Laser - Copier, Service Manual, Page: 299 / 448

Share
Download
Sharp MX 3501N - Color Laser - Copier Service Manual Download Page 299

MX3500N  ROM VERSION-UP  10 – 4

3) After selecting the file, click the “Submit” button to send the firmware to the Renaissance machine.

Update processing begins. While processing takes place, “Firmware Update, now processing...” appears.

4) When the firmware update is finished, “Firmware Update completed. Please reboot the MFP.” appears. Pressing the [Reboot] key, the

machine will restart to complete the update. The browser will shift to the following screen.

“Close the browser and open again to display latest information.” will be displayed.

5) Update is completed with the above procedures.

Summary of Contents for MX 3501N - Color Laser - Copier

































































































































































































































































































































































































































































Reviews:

No comments