Sharp MX 3501N - Color Laser - Copier, Service Manual

Page: 227 / 448

MX3500N SIMULATION 7 – 119
55
55-1
Purpose Setting
Function (Purpose) Used to set the engine soft SW.
Section PCU
Item Operation (Specifications)
Operation/Procedure
1) When the machine enters Simulation 55-01, the screen on the
right is displayed.
* On the initial screen, [SW-NO.] button is highlighted.
2) With [SW NO.] button highlighted, enter the SW number with
10-key.
* Press [C] key to clear the entered values.
3) Press [DATA] button.
[DATA] button is highlighted and the current set value is dis-
played.
4) With [DATA] button highlighted, enter the bit data with 10-key.
When 10-key corresponding to the bit is pressed, the bit data
display is switched as shown below.
[1]
→
[0]
[0]
→
[1]
* Entry of 1 to 8 only is effective.
5) When [EXECUTE] button is pressed, the currently entered
data are set.
After completion of setting, [EXECUTE] button returns to the
normal display.
55-2
Purpose Setting
Function (Purpose) Used to set the scanner soft SW
Section Scanner
Item Operation (Specifications)
Operation/Procedure
1) When the machine enters Simulation 55-02, the screen on the
right is displayed.
* On the initial screen, [SW-NO.] button is highlighted.
2) With [SW NO.] button highlighted, enter the SW number with
10-key.
* Press [C] key to clear the entered values.
3) Press [DATA] button.
[DATA] button is highlighted and the current set value is dis-
played.
4) With [DATA] button highlighted, enter the bit data with 10-key.
When 10-key corresponding to the bit is pressed, the bit data
display is switched as shown below.
[1]
→
[0]
[0]
→
[1]
* Entry of 1 to 8 only is effective.
5) When [EXECUTE] button is pressed, the currently entered
data are set.
After completion of setting, [EXECUTE] button returns to the
normal display.
55-3
Purpose Setting
Function (Purpose) Used to set the controller soft SW.
Section MFP
Item Operation (Specifications)
Operation/Procedure
1) When the machine enters Simulation 55-03, the screen on the
right is displayed.
* On the initial screen, [SW-NO.] button is highlighted.
2) With [SW NO.] button highlighted, enter the SW number with
10-key.
* Press [C] key to clear the entered values.
3) Press [DATA] button.
[DATA] button is highlighted and the current set value is dis-
played.
4) With [DATA] button highlighted, enter the bit data with 10-key.
When 10-key corresponding to the bit is pressed, the bit data
display is switched as shown below.
[1]
→
[0]
[0]
→
[1]
* Entry of 1 to 8 only is effective.
5) When [EXECUTE] button is pressed, the currently entered
data are set.
After completion of setting, [EXECUTE] button returns to the
normal display.
56
56-1
Purpose Data transfer
Function (Purpose) Used to execute data transfer.
Section MFP
Item Data transfer
Operation/Procedure
1) Select an item of data transfer.
* The selected button is highlighted and "ENABLE" is dis-
played in the corresponding display section.
SIMULATION NO.55-01
TEST
ENGINE SOFT SW. SETTING
CLOSE
EXECUTE
SW NO. AAA (SW No.1-16)
DATA 1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
:
:
0
SIMULATION NO.55-02
TEST
SCANNER SOFT SW. SETTING.
CLOSE
EXECUTE
SW NO. AAA (SW No.1-16)
DATA 1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
㧦
㧦
0
SIMULATION NO.55-03
TEST
MFP SOFT SW. SETTING.
CLOSE
EXECUTE
SW NO. AAA (SW No.1-16)
DATA 1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
㧦
㧦
0