Sharp MX 3501N - Color Laser - Copier, Service Manual, Page: 142 / 448

MX3500N SIMULATION 7 – 34
26-38
Purpose Setting
Function (Purpose) Used to set Continue/Stop of print when the
developer life is reached.
Section Other
Item Specifications (Operation mode)
Operation/Procedure
1) Enter the set value with 10-key.
* Press [C] key to clear the entered value.
2) When [OK] button is pressed, the current entered value is
saved to EEPROM and RAM.
* When [COLOR], or [BLACK] key is pressed, the current set
value is saved to EEPROM and RAM.
<Setting range and default value of each set value>
26-41
Purpose Setting
Function (Purpose) Used to set YES/NO of AMS setting in the
center binding mode.
Section —
Item Specifications (Operation mode)
Operation/Procedure
1) Enter the set value with 10-key.
* Press [C] key to clear the entered value.
2) When [OK] button is pressed, and the current entered value is
saved to EEPROM and RAM.
* When [COLOR], or [BLACK] key is pressed, the current set
value is saved to EEPROM and RAM.
<Setting range and default value of each set value>
<Initial value and set value liked with the destination>
26-49
Purpose Setting
Function (Purpose) Used to set the copy speed mode.
Section —
Item Setting
Operation/Procedure
1) When the machine enters Simulation 26-49, the current set
status is displayed.
* The current set button is highlighted.
2) Select an item to be changed, and it is highlighted. The setting
is saved to EEPROM and RAM.
* Only one can be selected for each item.
<Item description>
Item Display Content
Setting
range
Default
value
A MAINTENANCE
LIFE OVER
(0:CONTINUE
1:STOP) 0 Continue/Stop setting
of print when the
maintenance life is
over (Print Continue) 0 to 1 0
1 Continue/Stop setting
of print when the
maintenance life is
over (Print Stop)
B FUSER WEB
END
(0:CONTINUE
1:STOP) 0 Continue/Stop setting
of print when the
fusing web is end
(Print Continue) 0 to 1 0
1 Continue/Stop setting
of print when the
fusing web is end
(Print Stop)
0
A:
A 㧦 0
㧧 (0:ONCE 1:ANY)
SIMULATION NO.26-35
TROUBLE MEMORY MODE SETUP
0
㨇
0
㨪
1
㨉
OK
TEST
CLOSE
0
A:
A 㧦 1
B 㧦 1
㧧 MAINTENANCE LIFE OVER (0:CONTINUE 1:STOP)
㧧 FUSER WEB END (0:CONTINUE 1:STOP)
SIMULATION NO.26 㧙 38
ENGINE LIFE OVER SETTING
1
0 1
OK
TEST
CLOSE
Item Display Content
Setting
range
Default value
A (0:YES
1:NO) 0 Center binding
mode AMS setting 0 to 1 Refer to <Initial
value and set
value linked with
the destination>.
1 Center binding
mode AMS cancel
Destination Setting value
U.S.A 0 (Cancel)
CANADA 0 (Cancel)
INCH 0 (Cancel)
JAPAN 0 (Cancel)
AB_B 0 (Cancel)
EUROPE 1 (Setting)
U.K 1 (Setting)
AUS. 0 (Cancel)
AB_A 0 (Cancel)
CHINA 0 (Cancel)
Item
Set
value
Content
Default
value
POSTCARD LOW Postcard copy speed LOW LOW
HIGH Postcard copy speed HIGH
0
A:
A 㧦 0 㧧 (0:YES 1:NO)
SIMULATION NO.26-41
PAMPHLET MODE AMS SETTING.
0
㨇
0
㨪
1
㨉
OK
TEST
CLOSE
1/1
SIMULATION NO.26-49
TEST
COPY SPEED MODE SETUP
LOW POSTCARD 㧦 HIGH
0
CLOSE