Sharp MX 3501N - Color Laser - Copier Service Manual Download Page 30

Page: 30 / 448

MX3500N EXTERNAL VIEW AND INTERNAL STRUCTURE 5 – 3

C. Automatic document feeder

•

MX-3500N/4500N

•

MX-3501N/4501N

NOTE: For the MX-3501N/4501N automatic document feeder (DSPF), refer to "00ZMX3501NS1E."

No.

Name

Function/ Operation

Note

Document feed roller

Transports a document automatically.

Document feed section cover

This cover is opened when removing a paper jam or cleaning the
document feed roller.

Document guide

Guides to scan a document properly. Set to the set document size.

Document set table

A document is set on this table. In the case of a single-surface
document, set it face up.

Document exit section

The scanned document is discharged to this section.

Document scan section

The document set on the document set table is scanned in this
section.

Document size detection plate

Detects the size of a document set on the document table (glass
surface).

Document reverse tray

When scanning a document, it is temporarily discharged to this
section to be reversed for scanning the back surface.

Document table (Glass surface)

Used for thick documents or book documents which cannot be
entered to the auto document feeder.

Summary of Contents for MX 3501N - Color Laser - Copier

































































































































































































































































































































































































































































Search results

Summary of Contents for MX 3501N - Color Laser - Copier

Reviews:

Related manuals for MX 3501N - Color Laser - Copier

Brands by name

Popular brands

Sharp MX 3501N - Color Laser - Copier, Service Manual

Search results

Summary of Contents for MX 3501N - Color Laser - Copier

Reviews:

Related manuals for MX 3501N - Color Laser - Copier

Brands by name

Popular brands