manualshive.com logo in svg

Sharp MX 3501N - Color Laser - Copier, Service Manual

Share
Download
Sharp MX 3501N - Color Laser - Copier Service Manual Download Page 388

MX3500N  PHOTOCONDUCTOR SECTION  i – 5

4) Disengage the lock pawl with a screwdriver, and remove the

MC cleaner shaft. 

5) Release the pawl, and remove the process cover. Remove the

MC charger unit.

c. Side seal F, R

d. Toner reception seal

1) Remove each drum unit from the machine.
2) Remove the OPC drum.
3) Remove the MC charger unit.
4) Remove the side seal F/R and the toner reception seal.

* When attaching the side seal F/R and the toner reception

seal, arrange so that they are in the ranges specified in the
figure below.

e. Cleaner blade

1)

Remove each drum unit from the machine.

2)

Remove the OPC drum.

3)

Remove the MC charger unit.

4)

Remove the side seal F/R and the toner reception seal.

5)

Remove the screws, and remove the cleaner blade.

6)

Remove the toner mixing sheet from the cleaner blade.

* Tighten the screws according to the marks 1, 2, and 3.

(2) Others

a. Waste toner drive motor

1)

Remove the frame cover. (Refer to Frame Cover in External
Outfit Section.)

2)

Remove the connector and the screws, then remove the waste
toner drive unit.
Remove the screw, and remove the waste toner drive motor
from the waste toner drive unit. 

1

2

3

0 - 0.5mm

0 - 0.5mm

0 - 0.5mm

0 - 0.3mm

0 - 0.3mm

Reference line

Reference line

Reference line

Reference line

Reference line

0 - 0.3mm

A

A

A

A

2

3

1

Summary of Contents for MX 3501N - Color Laser - Copier

































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands