manualshive.com logo in svg

Sharp MX 3501N - Color Laser - Copier, Service Manual

Share
Download
Sharp MX 3501N - Color Laser - Copier Service Manual Download Page 425

MX3500N  PAPER EXIT SECTION  O – 4

h. Fusing web cleaning motor

1) Remove the paper exit unit.
2) Remove the exhaust fan duct.
3) Disconnect the connector, and remove the screws, and then

remove the fusing web cleaning motor.

i. Paper exit roller 1 (Drive)

1) Remove the paper exit unit.
2) Remove the exhaust fan duct.
3) Remove the slide motor unit.
4) Remove the parts. Remove the paper exit full detection sen-

sor. Slide the bearing, and remove the shifter unit.

5) Remove the parts, and remove the paper exit roller 1 (drive).

j. Fusing drive motor

1)

Remove the paper exit unit.

2)

Disconnect the connector, and remove the screws, and then
remove the fusing drive motor.

k. Paper exit drive motor

l. ADU motor upper

1)

Remove the paper exit unit.

2)

Disconnect the connector, and remove the screws, and
remove the paper exit drive motor (A), and the ADU motor
upper (B).

* Be careful to the motor installing direction.
* When installing, attach the belt as shown below.

1

2

4

5

3

A

A

B

B

Summary of Contents for MX 3501N - Color Laser - Copier

































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands