Sharp MX 3501N - Color Laser - Copier, Service Manual

Page: 205 / 448

MX3500N SIMULATION 7 – 97
* "<DIR>" is displayed at the head.
If the folder name is of more than 34 characters, only 34
characters are displayed.
* When [ .. ] button is pressed on the folder selection screen 2,
the display is shifted to the folder selection screen 1. On the
folder or file selection screen, the keys are disabled.
* The path of the folder or file is displayed on the title section.
If the path is of more than 50 characters, only 50 characters
are displayed.
3) The current version and the update version are displayed.
4) Press [EXECUTE] button.
[EXECUTE] button is highlighted, and [YES] and [NO] buttons
are changed from gray-out display to active display.
5) Press [YES] button.
[YES] button is highlighted, and update of the selected opera-
tion manual is executed.
* When [NO] and [EXECUTE] button are pressed, the display
returns to the version display screen.
6) After completion of update, the result is displayed.
When the operation is completed normally, "COMPLET" is dis-
played. In case of an error, "ERROR" is displayed.
* When [CA] key or [SYSTEM SETTING] key is pressed during
execution, the operation is interrupted and the machine is reboo-
ted.
* When [OK] button is pressed, the machine is rebooted.
* When [CA] key is pressed on the folder selection screen 1 and 2,
the simulation is terminated.
* When [SYSTEM SETTINGS] key is pressed on the folder selec-
tion screen 1 and 2, the display returns to the sub code entry
screen.
* When [CA] key or [SYSTEM SETTINGS] key is pressed to exit
the simulation on the version display screen and the following
screens before execution, the machine is rebooted.
<Folder selection screen 1>
<Folder selection screen 2>
50
50-1
Purpose Adjustment
Function (Purpose) Used to adjust the copy image position on
print paper in the copy mode and to adjust
the void area (image loss). (The similar
adjustment can be executed with SIM50-05
and 50-02 (Simple method). (Document
table mode))
Section —
Item Image quality (Image position)
Operation/Procedure
1) Select the set item with [
↑
] and [
↓
] buttons.
The highlighted set value is switched and the value is dis-
played in the setting area.
* If there is any item over [
↑
], an active display is made and
item is shifted.
If there is no item over [
↑
], the display grays out and the
operation is invalid.
If there is any item under [
↓
], an active display is made and
item is shifted.
If there is no item over [
↓
], the display grays out and the
operation is invalid.
2) Enter the set value with 10-key.
* Press [C] key to clear the entered values.
3) When [OK], [
↑
], [
↓
] button, [COLOR], or [BLACK] key is
pressed, the current entered value is saved to EEPROM and
RAM.
* When [CLOSE] button is pressed, the display is shifted to
the copy basic screen of simulation.
* Copying can be performed also by pressing [COLOR]/
[BLACK] key.
SIMULATION NO.49-03
TEST
E-MANUAL UPDATE/usbbd00
<DIR> FOLDER1
<DIR> FOLDER2
1/1
0
CLOSE
<DIR> FOLDER3 <DIR> MANUAL1
..
SIMULATION NO.49-03
TEST
E-MANUAL UPDATE/usbbd00
<DIR> MANUAL2 <DIR> MANUAL3
1/1
0
CLOSE
..