Sharp MX 3501N - Color Laser - Copier Service Manual Download Page 108

Page: 108 / 448

MX3500N ADJUSTMENTS 6 – 63

5) Press [EXCUTE] key.

The adjustment pattern is printed out.

6) Set the adjustment pattern on the document table. (Any direc-

tion)
Note: Fit the adjustment pattern correctly with the document
guide.

7) Press [EXCUTE] key.

The following items are automatically adjusted.
* Print image lead edge image position adjustment
* Print image off-center adjustment

8) Press [OK] key.

The adjustment result becomes valid.

Perform procedures 4) to 7) for each paper feed tray.

27-C

Copy lead edge image reference position
adjustment, image off-center, sub scanning
direction image magnification ratio
automatic adjustment

1) Enter the SIM50-28 mode.

2) Select [OC ADJ] with the key button.
3) Select the paper feed tray with paper in it with the key button.

(Any paper size will do.)

4) Press [EXCUTE] key.

The adjustment pattern is printed out.

Set the adjustment pattern on the document table. (Any direc-
tion)
Note: Fit the adjustment pattern correctly with the document
guide.

Press [EXCUTE] key.

The following items are automatically adjusted.

Copy lead edge image reference position adjustment,
image off-center, sub scanning direction image magnifica-
tion ratio automatic adjustment

Press [OK] key.
The adjustment result becomes valid.

27-D

SPF mode image off-center, image lead
edge position, sub scanning direction
image magnification ratio automatic
adjustment

Refer to the RSPF (MX-RPX1) SM.

SIMULATION NO.50-28

TEST

AUTO IMAGE POSITION ADJUSTMENT : SERVICE

OC ADJ

BK-MAG ADJ

SPF ADJ

SETUP/PRINT ADJ

RESULT

DATA

1/1

SIMULATION

NO.50-28

TEST

AUTO

IMAGE

POSITION

ADJUSTMENT

㧦

SERVICE

EXECUTE

1/1

MFT

CS1

CS2

SIMULATION NO.50-28

TEST

AUTO

IMAGE

POSITION

ADJUSTMENT

SERVICE

EXECUTE

PLEASE

SET

THE

SIT

CHART

PAPER

THE

THEN

PRESS

[EXECUTE]

START

REPRINT

SIMULATION NO.50-28

TEST

AUTO

IMAGE

POSITION

ADJUSTMENT

SERVICE

LEAD

OFFSET

SUB

RESCAN

REPRINT

RETRY

DATA

Summary of Contents for MX 3501N - Color Laser - Copier

































































































































































































































































































































































































































































Search results

Summary of Contents for MX 3501N - Color Laser - Copier

Reviews:

Related manuals for MX 3501N - Color Laser - Copier

Brands by name

Popular brands

Sharp MX 3501N - Color Laser - Copier, Service Manual

Search results

Summary of Contents for MX 3501N - Color Laser - Copier

Reviews:

Related manuals for MX 3501N - Color Laser - Copier

Brands by name

Popular brands