manualshive.com logo in svg

Sharp MX-2300 G, Service Manual, Page: 404 / 428

Share
Download
Sharp MX-2300 G Service Manual Download Page 404

MX-2300/2700 N/G  PAPER EXIT SECTION  O – 3

3)

Remove the paper exit cooling fan motor.

f. Discharge brush

1)

Remove the paper exit unit.

2)

Remove the exhaust fan duct.

3)

Remove the discharge grounding plate, and remove the dis-
charge brush.

* Discharge brush attachment reference

When attaching the discharge brush, attach it along the
shifter PG.

g. Shifter motor

1)

Remove the paper exit unit.

2)

Disconnect the connector and the grounding terminal, and
remove the snap band. Remove the slide motor unit.

3)

Remove the shifter motor.

h. Paper exit roller 1 (Drive)

1)

Remove the paper exit unit.

2)

Remove the exhaust fan duct.

3)

Remove the slide motor unit.

4)

Remove the parts. Slide the bearing, and remove the shifter
unit.

5)

Remove the parts, and remove the paper exit roller 1 (drive).

i. Fusing drive motor

1)

Remove the paper exit unit.

2)

Remove the fusing drive motor.

1

2

1

2

1

2

3

4

Summary of Contents for MX-2300 G













































































































































































































































































































































































































































Reviews:

No comments