MX-2300/2700 N/G SIMULATION 7 – 47
<Code descriptions in the above list>
43-21
Purpose
: Setting
Function (Purpose)
: Used to perform correction of high temper-
ature and high humidity (H/H) environment
for the fusing temperature setting 1 (SIM
43-01) for each paper.
Section
: Fusing
Item
: Operation
Operation/Procedure
1)
When the machine enters SIM 43-21, the following screen is
displayed. (The current set value is displayed.)
2)
Select the set item with [
↑
] and [
↓
] buttons.
The highlighted section of the set value is switched and dis-
played on the set setting area.
* If there is any item over [
↑
], an active display is made and
item is shifted.
If there is no item over [
↑
], the display grays out and the
operation is invalid.
If there is any item under [
↓
], an active display is made and
item is shifted.
If there is no item over [
↓
], the display grays out and the
operation is invalid.
3)
Enter the set value with 10-key.
* Press [C] key to clear the entered values.
4)
When [OK] button is pressed, the currently entered data are
saved to EEPROM and RAM.
* When [
↑
], [
↓
], [COLOR], or [BLACK] key is pressed, the current
set value is saved to EEPROM and RAM.
* Input value: The intercept for the correction value is 50. This is
because the set value is kept as a positive number in case of a
negative setting due to negative correction.
• Set value: Value to be set (–49 to +49), Input value: Actual input
(1 to 99)
<List of setting parameters>
O
HL_US HEAVY
LL
Correction value for heavy
paper TH_US set value
under LL environment
1 to 99
60
P
HL_UMOHP LL
Correction value for OHP
TH_UM set value under LL
environment
1 to 99
60
Q
HL_LM OHP LL
Correction value for OHP
TH_LM set value under LL
environment
1 to 99
60
R
HL_US OHP LL
Correction value for OHP
TH_US set value under LL
environment
1 to 99
60
S
HL_UM
ENVELOPE LL
Correction value for
ENVELOPE TH_UM set
value under LL
environment
1 to 99
60
T
HL_LM
ENVELOPE LL
Correction value for
ENVELOPE TH_LM set
value under LL
environment
1 to 99
60
U
HL_US
ENVELOPE LL
Correction value for
ENVELOPE TH_US set
value under LL
environment
1 to 99
60
V
HL_UM E-STAR
LL
Correction value for
preheating TH_UM set
value under LL
environment
1 to 99
60
W
HL_US E-STAR
LL
Correction value for
preheating TH_US set
value under LL
environment
1 to 99
60
X
PRE-JOB LL
Correction value for
TH_UM set value when
resetting from preheating
under LL environment
1 to 99
60
TH_UM
Fusing upper thermister main
TH_LM
Fusing lower thermister main
TH_US
Fusing upper thermister sub
HL_UM
Heater lamp upper main
HL_LM
Heater lamp lower main
HL_US
Heater lamp upper sub
Item
Display item
Item content
Set
range
Default
value
OK
0
A:
A : 55
;
HL_UM
READY LL
SIMULATION
NO.43-20
FUSER
TEMP
ADJUSTMENT
(LL)
55
㨇
1
㨪
99
㨉
TEST
B : 55
;
HL_LM
READY LL
C : 55
;
HL_US
READY LL
D : 55
;
HL_UM
PLAIN BW LL
CLOSE
Set value
–49
–25
–5
0
+5
+25
+49
Input value
1
25
45
50
55
75
99
Item
Item display
Content of item
Set
range
Default
value
A
HL_UM READY
HH
Correction value for
TH_UM set value in
READY standby under
HH environment
1 to 99
45
B
HL_LM READY
HH
Correction value for
TH_LM set value in
READY standby under
HH environment
1 to 99
45
C
HL_US READY
HH
Correction value for
TH_US set value in
READY standby under
HH environment
1 to 99
45
D
HL_UM PLAIN
BW HH
Correction value for BW
plain paper TH_UM set
value under HH
environment
1 to 99
45
E
HL_LM PLAIN
BW HH
Correction value for BW
plain paper TH_LM set
value under HH
environment
1 to 99
45
F
HL_US PLAIN
BW HH
Correction value for BW
plain paper TH_US set
value under HH
environment
1 to 99
45
G
HL_UM PLAIN
CL HH
Correction value for
COLOR plain paper
TH_UM set value under
HH environment
1 to 99
45
H
HL_LM PLAIN
CL HH
Correction value for
COLOR plain paper
TH_LM set value under
HH environment
1 to 99
45
I
HL_US PLAIN
CL HH
Correction value for
COLOR plain paper
TH_US set value under
HH environment
1 to 99
45
J
WARMUP
FUMON HL_UM
T HH
Correction value for
fusing motor front rotation
start TH_UM set value
under HH environment
1 to 99
50
K
WARMUP
FUMOFF HL_LM
T HH
Correction value for
fusing motor front rotation
end TH_UM set value
under HH environment
1 to 99
50