MX-2300/2700 N/G SIMULATION 7 – 43
33
33-1
Purpose
: Operation test/Check
Function (Purpose)
: Used to check the operations of the card
reader sensor and the related circuits. (The
card reader sensor operation can be moni-
tored with the LCD display.) (Japan only)
Section
: Other
Item
: Operation
Operation/Procedure
1)
When the machine enters Simulation 33-01, the following
screen is displayed to show the sensor status change.
* When each sensor is turned ON, the corresponding sensor name
is highlighted.
<Sensor name>
40
40-2
Purpose
: Adjustment
Function (Purpose)
: Used to adjust the detection level of the
manual feed tray paper width detector.
Section
: Paper feed
Item
: Operation
Operation/Procedure
1)
Extend the manual feed tray guide to the max. width and press
[EXECUTE] button. [EXECUTE] button is highlighted and the
current AD value is temporality saved to RAM as the max.
width.
* During adjustment, "EXECUTING..." is displayed.
* After completion of the max. width adjustment, the P1 width
(A4) adjustment value start screen is displayed.
2)
Extend the manual feed tray guide to the P1 (A4) width posi-
tion and press [EXECUTE] button. [EXECUTE] button is high-
lighted and the current AD value is temporality saved to RAM
as the P1 width (A4) position. (Hereinafter, the value is saved
for each size setting.)
3)
Perform the adjustment of P2 position width (A4R) and min.
position according to the above procedures.
4)
After completion of the adjustment, "COMPLETE" is displayed
and the RAM contents are saved to EEPROM. If the adjust-
ment is not completed normally for any reason, "ERROR" is
displayed and data are not saved to EEPROM. In this case,
the adjustment must be tried again.
<List of set items>
<List of result displays>
40-7
Purpose
: Setting
Function (Purpose)
: Used to set the adjustment value of the
detection level of the manual paper feed
tray paper width detector.
Section
: Paper feed
Item
: Specifications
Operation/Procedure
1)
Select the set item with [
↑
] and [
↓
] buttons.
The highlighted set value is switched and the value is dis-
played in the setting area.
* If there is any item over [
↑
], an active display is made and
item is shifted.
If there is no item over [
↑
], the display grays out and the
operation is invalid.
If there is any item under [
↓
], an active display is made and
item is shifted.
If there is no item over [
↓
], the display grays out and the
operation is invalid.
2)
Enter the set value with 10-key.
* Press [C] key to clear the entered values.
3)
When [OK], [
↑
], [
↓
] button, [COLOR], or [BLACK] key is
pressed, the currently entered data are saved to EEPROM and
RAM.
<Set range and default value of each setup>
Code (Display)
Sensor name
CARD
Card insertion detection
DATA
Card number signal detection
CLOCK
Standard clock signal detection
0
CARD
READER
SENSOR
CHECK
1/1
CLOSE
SIMULATION
NO.33
㧙
01
TEST
1/1
CARD
DATA
CLOCK
Display
Description of item
MAX POSITION
Manual feed max. width
P1 (A4) POSITION
Manual feed P1 position width (A4)
P2 (A4R) POSITION
Manual feed P2 position width (A4R)
MIN POSITION
Manual feed min. width
Item name
Item content
COMPLETE
Adjustment completed
ERROR
Adjustment failed
Item
Item
Item content
Set
range
Default
value
A
MAX POSITION
Manual feed max. width
0 to 255
241
B
P1 POSITION
Manual feed P1 position
(A4)
0 to 255
231
C
P2 POSITION
Manual feed P2 position
(A4R)
0 to 255
140
D
MIN POSITION
Manual feed min. width
0 to 255
19
0
SIMULATION
NO.40-02
TEST
BYPASS TRAY ADJUSTMENT
CLOSE
EXECUTE
MAXPOSITION ADJUSTMENT.
PRESS [EXECUTE] TO START
0
A:
A : 241
;
MAX POSITION
B : 231
;
P1 POSITION
C : 140
;
P2 POSITION
D : 19
;
MIN POSITION
SIMULATION NO.40-07
BYPASS TRAY VALUE SETTING
241
[ 0~ 255 ]
OK
TEST
CLOSE