Sharp MX-2300 G, Service Manual, Page: 142 / 428

MX-2300/2700 N/G SIMULATION 7 – 36
<Reflection of items J and R after settlement of the value>
When the values of E to G (M to O) are changed and settled and
[OK] button is pressed, the values are saved to EEPROM and RAM
and set to Item J (R) at the same time.
26-69
Purpose : Setting
Function (Purpose) : Used to set whether the toner preparation
message and the toner near end message
are displayed or not when the toner quan-
tity reaches 25%.
Section : Process
Item : Specifications
Operation/Procedure
1) Select an item to be set with [
↑
] and [
↓
] buttons.
The highlighted section of the set value is switched and the
value is displayed in the setting area.
* When there is an item over [
↑
], the display becomes active
and shifts to another item.
When there is no item over [
↑
], the display grays out and the
operation is disabled.
When there is an item under [
↓
], the display becomes active
and shifts to another item.
When there is no item under [
↓
], the display grays out and
the operation is disabled.
2) Enter the set value with 10-key.
* Press [C] key to clear the entered value.
3) When [OK] button is pressed, the current set value is set.
* When [OK], [
↑
], [
↓
] button, [COLOR], or [BLACK] key is
pressed, the current set value is saved to EEPROM and
RAM.
<Setting range and default value of each value>
Day of week
specifying
flag 0 (Day of
week
specifying)
0 (Day of
week
specifying)
1 (Day
specifying)
1 (Day
specifying)
1 (Day
specifying)
0 (Day of
week
specifying)
0 (Day of
week
specifying)
0 (Day of
week
specifying)
1 (Day
specifying)
1 (Day
specifying)
UTC
specifying
flag 0 (UTC
OFF)
0 (UTC
OFF)
1 (UTC ON) 1 (UTC ON) 1 (UTC ON) 1 (UTC
ON)
1 (UTC
ON)
0 (UTC
OFF)
1 (UTC ON) 1 (UTC ON)
Summer time
end date
(Month) 10
(Month)
10
(Month)
1 (Month) 1 (Month) 1 (Month) 10
(Month)
10
(Month)
3 (Month) 1 (Month) 1 (Month)
Summer time
end date
(Day) 1 (Day) 1 (Day) 1 (Day) 1 (Day) 1 (Day) 1 (Day) 1 (Day) 1 (Day) 1 (Day) 1 (Day)
Summer time
end date
(Hour) 2 (Hour) 2 (Hour) 1 (Hour) 1 (Hour) 1 (Hour) 1 (Hour) 1 (Hour) 3 (Hour) 1 (Hour) 1 (Hour)
Summer time
end 0 (minute) 0 (minute) 0 (minute) 0 (minute) 0 (minute) 0 (minute) 0 (minute) 0 (minute) 0 (minute) 0 (minute)
Week of
summer time
end 5th (week) 5th (week) 1st (week) 1st (week) 1st (week) 5th (week) 5th (week) 5th (week) 1st (week) 1st (week)
Day of week
of summer
time end 0
(Sunday)
0
(Sunday)
1 (Monday) 1 (Monday) 1 (Monday) 0
(Sunday)
0
(Sunday)
0
(Sunday)
1 (Monday) 1 (Monday)
Flag to
specify the
day of week 0 (Day of
week is
specified)
0 (Day of
week is
specified)
1 (Date
specification)
1 (Date
specification)
1 (Date
specification)
0 (Day of
week is
specified)
0 (Day of
week is
specified)
0 (Day of
week is
specified)
1 (Date
specification)
1 (Date
specification)
Flag to
specify UTC UTC OFF UTC OFF UTC ON UTC ON UTC ON UTC ON UTC ON UTC OFF UTC ON UTC ON
Summer time
correction
value (Hour) 1 (Hour) 1 (Hour) 0 (Hour) 0 (Hour) 0 (Hour) 0 (Hour) 0 (Hour) 1 (Hour) 0 (Hour) 0 (Hour)
Summer time
correction
value
(minute) 0 (minute) 0 (minute) 0 (minute) 0 (minute) 0 (minute) 0 (minute) 0 (minute) 0 (minute) 0 (minute) 0 (minute)
Flag to
synchronize
with the
internet clock
server OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF
Setting
value
Destination
U.S.A CANADA INCH JAPAN AB_B EUROPE U.K. AUS. AB_A CHINA
CLOSE
0
A:
A : 1
B : 0
C : 0
D : 0
; GMT
±:-
; GMT HOUR
; GMT MINUTE
; INTERNET: YES
SIMULATION NO.26-67
SUMMER TIME&TIME ZONE ADJUSTMENT
1
[ 0~ 1 ]
OK
TEST
TIME ZONE SUMMER TIME
Item Display Content
Setting
range
Default
value
A TONER
PREPARATION
(0:YES 1:NO) 0 Toner preparation
message is displayed. 0 to 1 0
1 Toner preparation
message is not
displayed.
B TONER NEAR
END (0:YES
1:NO) 0 Toner near end
message is displayed. 0 to 1 0
1 Toner near end
message is not
displayed.