manualshive.com logo in svg

Sharp DM-3551, Operation Manual, Page: 88 / 286

Share
Download
Sharp DM-3551 Operation Manual Download Page 88

1-10

SELECTING RESOLUTION AND EXPOSURE SETTINGS

SELECTING THE  EXPOSURE

The initial exposure setting is AUTO. To change the setting, follow these steps:

■

Change the exposure.

1

Touch the SPECIAL MODES key.

SPECIAL MODES

STANDARD

RESOLUTION

2

Touch the EXPOSURE key.

POLLING

R

EXPOSURE

 PAGE

CAN

3

Touch the desired exposure key.

AUTO

DARK

ORIGINAL

LIGHT

ORIGINAL

The selected key is
highlighted.

4

Touch the outer OK key.

OK

OK

LIGHT

You will return to the initial
screen.

Dark

Select this setting if your original consists

Original

mostly of dark characters.

Auto

This setting automatically adjusts the ex-
posure for light and dark parts of the origi-
nal.

Light

Select this setting if your original consists

Original

mostly of faint characters.

■

Exposure settings

NOTE
When using the document glass to scan pages an original,
the exposure setting can be changed each time you change
pages. When using the automatic document feeder, the
exposure setting cannot be changed once scanning has
begun.

Summary of Contents for DM-3551































































































































































































































































































Reviews:

No comments