manualshive.com logo in svg

Sharp DM-3551, Operation Manual, Page: 246 / 286

Share
Download
Sharp DM-3551 Operation Manual Download Page 246

5-8

Misfeed in the mail-bin stacker

If a misfeed has occurred in the mail-bin stacker during printing, remove the misfed paper following the procedure
below.

6

Remove the misfed paper.

Be careful not to tear the
misfed paper during
removal.

7

Close the paper guide.

Close the paper guide
securely.

8

Close the front cover.

1

Open the top cover.

Top cover

Move the release lever in
the direction of the arrow
in the illustration to open
the top cover.

2

Remove the misfed paper.

Be careful not to tear the
misfed paper during
removal.
After removing the paper,
press down on the top
cover to close it.

3

If the misfed paper is not found in step 2,
open the front cover.

4

Turn the roller rotating knob in the direction
of the arrow to remove the misfed paper.

5

Open the paper guide.

Unlatch the paper guide
and open it in the direction
of the arrow.

MAIL-BIN STACKER

Summary of Contents for DM-3551































































































































































































































































































Reviews:

No comments