Sharp DM-3551, Operation Manual, Page: 233 / 286

4-7
4
Misfeed in the duplex module
1
Unlatch the duplex module and slide it to
the left.
Unlatch the unit and
gently move the module
away from the machine.
2
If the duplex module has an exit tray, rotate
it up out of the way and open the cover of
the duplex module.
If no exit tray is attached,
just open the cover of the
duplex module and ignore
any reference to the tray
in the following steps.
3
While holding the exit tray up, remove the
misfed paper as shown in the illustrations
below.
If paper is misfed at the
upper part of the duplex
module, gently remove it
while taking care not to
tear the paper.
If paper is misfed at the
lower part of the duplex
module, gently remove it
while taking care not to
tear the paper.
4
Close the cover of the duplex module and
lower the exit tray.
5
Gently close the duplex module.
After closing the duplex
module, confirm that the
misfeed message has
been cleared and the
normal display appears.
■
Misfeed in the bypass tray
1
Unlatch the duplex module and slide it to
the left.
Unlatch the unit and
gently move the module
away from the machine.
2
Remove the misfed from the bypass tray.
Be careful not to tear the
misfed paper during
removal.
3
Gently close the duplex module.
After closing the duplex
module, confirm that the
misfeed message is
cleared and that the
normal display appears.
MISFEED REMOVAL