manualshive.com logo in svg

Sharp DM-3551, Operation Manual, Page: 140 / 286

Share
Download
Sharp DM-3551 Operation Manual Download Page 140

6-14

1

Press the CUSTOM SETTINGS key.

2

Touch the LIST PRINT key.

Y

ST

S
L

LIST PRINT

RECEIVE MODE

3

Touch the SENDING ADDRESS LIST key.

SENDING ADDRESS LIST

PRINTER TEST PAGE

ALL CUSTOM SETTING LIST

4

Touch the key of the list you wish to print.

GS

SS LIST

INDIVIDUAL

LIST

GROUP LIST

PROGRAM LIST

MEMORY BOX

LIST

PROCESSING PRINT
DATA appears in the
message display and
printing begins.
To cancel printing, touch the
CANCEL key.

NOTES
• The list is printed before other print jobs are printed.

• If you attempt to print a list when no data exists, a warning message will appear.

PRINTING PROGRAMMED INFORMATION

You can print out lists of the one-touch keys, group keys, programs, and memory boxes that have been stored in the
machine.

Summary of Contents for DM-3551































































































































































































































































































Reviews:

No comments