manualshive.com logo in svg

Sharp DM-3551, Operation Manual, Page: 31 / 286

Share
Download
Sharp DM-3551 Operation Manual Download Page 31

29

MISFEED REMOVAL

Misfeed in scanner module

When an original has misfed in the scanner module, remove the misfed original following the procedure below.

NOTES

●

For misfeed removal in the main unit and other peripheral devices, see the “Operation manual (for printer operation and
general information)”.

●

If you press the [INFORMATION] key, detailed information for misfeed removal will be displayed on the touch panel.

1

Open the document feeding area cover and
remove any misfed originals.

Document feeding area 
cover

2

Close the document feeding area cover.

Close the cover securely so
that cover clicks into place.

3

Open the document cover and turn the green
rotating knob in the direction of the arrow to
remove any misfed originals.

4

Close the document cover.

■

A message may appear indicating the number of
originals which must be returned to the document
feeder tray. Return the originals to the document feeder
tray and press the [START] key.

copy-2_Ep.P65

2/04/01, 19:18

29

Summary of Contents for DM-3551































































































































































































































































































Reviews:

No comments