Sharp DM-3551 Operation Manual Download Page 156

Page: 156 / 286

8-10

KEY OPERATOR PROGRAMS

PRINTING OUT SETTINGS

Settings established with the key operator programs can be verified by printing them out.

Press the CUSTOM SETTINGS key.

Touch the KEY OPERATOR PROGRAMS key.

DISPLAY

CONTRAST

RECEIVE MO

LIST PRIN

KEY OPERATOR PROGRAMS

ADDRESS
CONTROL

Touch the LIST PRINT key.

END
GS

DEVICE CONTROL

LIST PRINT

Touch the ALL KEY OPERATOR PROGRAMS
LIST key.

IMAGE SENDING ACTIVITY REPORT

SENDER LIST

ALL KEY OPERATOR PROGRAMS LIST

PROCESSING PRINT DATA
appears in the message
screen and printing begins.
To cancel printing, touch the
CANCEL key.

NOTES
• The list is printed before other jobs waiting to be printed.

• In the screen of Step 4, you can touch the SENDER LIST key to print the Sender List. This allows you to check the name and

fax number you programmed in "Own number and name set" on page 8-4.

• In the screen of Step 4, you can touch the IMAGE SENDING ACTIVITY REPORT key to print an activity report (transmissions

and receptions). Print this list when you wish to check the activity record.

Summary of Contents for DM-3551































































































































































































































































































Search results

Summary of Contents for DM-3551

Reviews:

Sharp DM-3551, Operation Manual, Page: 156 / 286

Search results

Summary of Contents for DM-3551

Reviews: