Sharp DM-3551, Operation Manual, Page: 84 / 286

1-6
ORIGINALS
ORIGINALS THAT CAN BE FAXED
■
Original sizes
Minimum original size Maximum original size
Using the auto document feeder
11" (width)x31-1/2"* (length)
8-1/2" (width)x5-1/2" (length) *Long documents can be loaded
Using the document glass
5-1/2" (width)x8-1/2" (length)
11" (width)x17" (length)
NOTE
Originals that are not a standard size (5-1/2"x8-1/2", 8-1/2"x11", 8-1/2"x11"R, 8-1/2"x14", 11"x17") can also be faxed.
■
Scanning area of original
Note that the edges of an original cannot be scanned.
Area that cannot be scanned
Far edge
Near edge
Bottom edge Top edge
Area that cannot be scanned: 0.2" or less at top edge
and 0.2" or less at bottom edge
: Near edge + far edge = 0.2" or less
Faxed document width Receiving machine's paper width Reduced size Ratio
11"x17" 8-1/2"x14" 8-1/2"x14" 1 : 0.64 (Area ratio)
11"x17" 8-1/2"x11" 8-1/2"x11"R 1 : 0.5 (Area ratio)
8-1/2"x14" 8-1/2"x11" 8-1/2"x11"R 1 : 0.78 (Area ratio)
A document can also be faxed without reducing its size. In this case, the left and right edges will not be transmitted.
(Refer to page 8-6.)
■
Automatic reduction of faxed document
If the size (width) of the faxed document is greater than the receiving machine's paper size, the size will be
automatically reduced.