Sharp DM-3551, Operation Manual, Page: 135 / 286

6-9
6
STORING A GROUP INDEX
Auto dial keys (one-touch keys and group keys) are normally stored in the ABC index. To make auto dial keys more
convenient to use, you can store a group of auto dial keys in a group index and assign a name to that index. When you
switch to the group indexes, USER 1, USER 2, USER 3, USER 4, USER 5, and USER 6 appear. You can assign any
name up to 6 characters long to each of the USER indexes.
The procedure for storing auto dial numbers in a group index is explained on page 6-3, and the procedure for switching
between the ABC index and the group indexes is explained on page 1-5.
1
Press the CUSTOM SETTINGS key, and then
touch the ADDRESS CONTROL key (refer to
steps 1 and 2 on page 6-2).
2
Touch the CUSTOM INDEX key.
DIRECT ADDRESS / PROGRAM
CUSTOM INDEX
3
Touch an index key (USER 1 to USER 6).
You can enter a name for the selected index.
CUSTOM SETTINGS
CUSTOM INDEX
SELECT THE KEY TO BE CUSTOM NAMED.
OK
USER 1 USER 2 USER 3 USER 4 USER 5 USER 6
When touched, the letter entry screen appears.
4
Enter a maximum of 6 characters for the index
name.
Use the key to clear the displayed name and then
enter the desired name. Refer to page 6-15 for the
procedure for entering characters.
When finished, touch the OK key. The new name appears
in the screen of step 3.
5
If you wish to program another index name,
repeat steps 3 and 4.
When finished, touch the OK key.
To change a user index name, re-enter the name as
explained in step 4.