manualshive.com logo in svg

Sharp DM-3551, Operation Manual, Page: 53 / 286

Share
Download
Sharp DM-3551 Operation Manual Download Page 53

13

SCANNING SETTINGS (ORIGINAL SIZE, RESOLUTION, EXPOSURE, AND FILE FORMAT)

SELECTING THE  RESOLUTION

After loading the original, you can adjust the resolution as needed for the type of original and the size of the letters on
it. After loading the original in scanner mode, adjust the settings as explained below. The initial resolution setting is
STANDARD.

■

Change the resolution.

1

Touch the RESOLUTION key.

AUTO   8 X11

ORIGINAL

STANDARD

RESOLUTION

PROGRAMMED

FILE FORMAT

1 

/

 2

2

Touch the desired resolution key.

HALF TONE

OK

L/FTP

200

300

400

600

INTERNET

FAX

200 100

200 200

200 400

400 400

(dpi)

STANDARD

FINE

SUPER FINE

ULTRA FINE

200 200

300 300

400 400

600 600

200 100

200 200

200 400

400 400

(

The selected key is
highlighted. If you selected
FINE, SUPER FINE, or
ULTRA FINE, you can also
touch the HALF TONE key
to select halftone.

3

Touch the OK key.

HALF TONE

OK

MAIL/FTP

00 200

00 300

00 400

00 600

INTERNET

FAX

200 100

200 200

200 400

400 400

(dpi)

OK

You will return to the initial
screen.

NOTES

• The initial factory resolution setting is Standard. If desired,

you can change the initial setting to a different setting
using the key operator program. (Refer to page 26.)

• When using the automatic document feeder, the

resolution setting cannot be changed once scanning has
begun.

■

Resolution settings

Standard

Touch this key if your original consists of
normal-sized characters (like those in
this manual).

Fine

Touch this key if your original has small
characters or diagrams. The original will
be scanned at twice the resolution of the
Standard setting.

Super fine

Touch this key if your original has intri-
cate pictures or diagrams. A higher-qual-
ity image will be produced than with the
Fine setting.

Ultra fine

Touch this key if your original has intri-
cate pictures or diagrams. This setting
gives the best image quality. However,
transmission will take longer than with
the other settings.

Half tone

Touch this key if your original is a photo-
graph or has gradations of color (such as
a color original). This setting will produce
a clearer image than Fine, Super fine, or
Ultra fine used alone. Half tone cannot be
selected if Standard has been selected.

Summary of Contents for DM-3551































































































































































































































































































Reviews:

No comments