81
IDENTIFYING UNIT PROBLEMS
Problems
Check Point
Remedy
Paper feeding or
jamming
problems occur.
Is the unit on a flat surface?
The unit must be placed on a flat
surface in order to operate
correctly.
Is the paper curled or folded?
Using curled or previously copied
paper may cause paper supply
problems. The use of new paper
is recommended.
The SPF does
not run smoothly.
Have you inserted too many
pages into the SPF?
The SPF can hold up to 20
sheets. Placing over 20 sheets
will cause paper supply problems.
Is the end of the original
protruding into the SPF.
Insert the original correctly. Fan
the original before placing into the
SPF.
Is the original guide aligned
correctly to the placed original?
Be sure to align the original guide
correctly to the placed original.
Copies are too
light or too dark.
Check the "Brightness" and
"Intensity" setting.
Change the "Brightness" and
"Intensity" settings appropriately.
(See page 59)
Dirty spots or
white lines
appear on copies.
Is the original table glass or the
back side of the SPF clean?
Clean the original table glass.
(See page 77)
Is the original stained or marked? Use a better quality original.
Is the print head dirty?
Clean the print head. (See page 73)
Have you aligned the print heads
correctly?
Align the print heads. (See page
17)
Is the paper too thick?
Turn the paper knob to "Thick
Paper (
)" setting.
Use paper of 60
g/
m
2
- 200
g/
m
2
.