manualshive.com logo in svg

Sharp AJ-6020, Operation Manual, Page: 38 / 93

Share
Download
Sharp AJ-6020 Operation Manual Download Page 38

36

INSTALLING THE "AJ-6000 SERIES DRIVER"

Installing through "Setup" (Parallel interface)

If the driver failed to be installed when connected by the parallel interface, follow the steps
shown below. The steps also help you reinstall the driver when necessary.

1

Make sure that the unit is connected to your computer.

2

Turn on the unit, and then turn on your computer.

3

Insert the supplied CD-ROM into your CD-ROM drive.

4

Click the "Start" button, and select "Run".

5

Type "D:\DRIVERS\MFP-PS\NEUTRAL\SETUP\SETUP.EXE", and 
then click the "OK" button.

(Change "D" to correspond to the letter of your CD-ROM drive.)

The setup program will start to copy the files.

If your operating system is Windows Me/98/2000, restart your computer. With
Windows 95, go to step 6.

6

Check the radio button for "Yes", and click the "Finish" button.

You have completed the installation of the AJ-6000 series driver. 

The screen images in this section are those of Windows 98.

After installing the AJ-6000 series driver, install AJ-6000 series software referring
to the next page.

Summary of Contents for AJ-6020






























































































Reviews:

No comments