manualshive.com logo in svg

Sharp AJ-6020, Operation Manual, Page: 69 / 93

Share
Download
Sharp AJ-6020 Operation Manual Download Page 69

67

RESETTING ALL SETTING VALUES TO THE 
FACTORY DEFAULT VALUES

This function will return all current settings and the user defaults to the factory default
settings. Follow the steps shown below to return all changed settings to the factory default
settings.

1

Press the "MENU" button, and repeatedly press the 

 or 

"ARROW" buttons until "Reset Factory" is shown on the first
line of the display panel.

2

Press the "ENTER" button.

3

Repeatedly press the 

 or 

 "ARROW" button to display 

"2. Yes" or "1. No" on the second line of the display panel.

4

Press the "ENTER" button.

When selecting "2. Yes", the following message will appear on the display panel to
inform you that all the setting values will return to their factory defaults. The unit
will automatically return to the ready state.

If  "1. No" was selected in step 3 the display will immediately return to the ready
message.

8.Reset Factory

Resetting Factory
Defaults...

Summary of Contents for AJ-6020






























































































Reviews:

No comments