27
INSTALLING THE "AJ-6000 SERIES DRIVER"
Installing onto Windows Me
1
Make sure that the unit is connected to your computer.
2
Turn on the unit, and then turn on your computer.
"Add New Hardware Wizard" window will appear.
3
Insert the supplied CD-ROM into your CD-ROM drive.
4
Check the radio button for "Automatic search for a better driver
(Recommended)", and then click the "Next" button.
5
Select the appropriate driver, and click the "Next" button.
If your unit is connected by USB cable, select "SHARP AJ-6020 USB" (Location:
D:\DRIVERS\MFP-PS\ENGLISH\WIN98\SCUSUSB.INF). On the other hand, if your
unit is connected by parallel cable, select "SHARP AJ-6020" (Location:
D:\DRIVERS\MFP-PS\ENGLISH\WIN98\SCUSMFP.INF).
("D" is changed to correspond to the letter of your CD-ROM drive.)
6
Click the "Finish" button.
7
Click the "Yes" button when a message that prompts you to
reboot your computer appears.
You have completed the installation of the AJ-6000 series driver.
If "Add New Hardware Wizard" does not appear, go to "Installing through Add New
Hardware" (page 34) when using USB cable, go to "Installing through Setup"
(page 36) when using parallel cable.
After installing the AJ-6000 series driver, install AJ-6000 series software referring
to page 37.