55
MAKING SELECTIONS FOR COPYING
How to set the copy quantity
A single copy can be made with the default setting, i.e., when "0" is displayed.
Use the (
), (
) "COPY QUANTITY" buttons to set the copy quantity.
During Copying
During copying, the copy quantity display will decrease by 1 each time a copy is
made.
How to select colour or black/white copy
You can switch modes by pressing the "COLOUR MODE" button.
How to select the copy quality
Copy quality can be selected in four increments.
You can select the copy quality by pressing the "COPY QUALITY" button.
Example: If the number of copies is set to "2".
!
To cancel a multiple copy job, press the "CLEAR/STOP" button (
).
!
You can set the number of copies up to 50. If you want to change the number of
copies, press the "CLEAR/STOP" button (
) and set the required number of
copies.
!
Some of the quality settings cannot be selected depending on the "Paper Type".
!
To copy a monochrome original with the "best" quality, the unit uses colour ink
even if in the "BLACK/WHITE MODE". To make a clear copy, use the "COLOUR
MODE".
Set the number of copies using the increase
( ) / decrease ( ) buttons.
Repeatedly pressing the buttons will increase/decrease
the display in increments of 1.
If either button is pressed and held down, the display will
change in increments of one until 5 is reached and then
will change in increments of 5. (Ex. 10. 15, 20 ...)
Copying...
100% A4 2
Copying...
100% A4 1
First page
completed
Second page
completed
Ready to Copy
100% A4 2
When the upper colour mode indicator is
illuminated, the unit will copy in multicolour.
When the lower indicator is illuminated, the
unit will copy in black and white. Default
setting is "COLOUR"
The selections allow you to trade off between
speed and image quality.
Example: Moving the indicator upward increases
the speed but decreases the image quality.
Default setting