manualshive.com logo in svg

Sharp AJ-6020, Operation Manual, Page: 40 / 93

Share
Download
Sharp AJ-6020 Operation Manual Download Page 40

38

INSTALLING THE "AJ-6000 SERIES SOFTWARE"

To display the Online Manual, click the "Display of online manual" button.

You can install the software without reading the Online Manual.

Refer to "HOW TO USE THE ONLINE MANUAL" (page 44) when you need to read it.

6

Check the contents of the package on the screen, and then click
the "Start" button.

The software packages to be installed will be displayed on the screen. If
inappropriate packages are displayed, click the "Back" button to select appropriate
packages again.

Once the installation starts, each installer of the selected software packages will
run automatically. Follow the on-screen instructions to install the AJ-6000 series
software.

7

Click the "Close" button when the message to inform you of the
completion of the installation appears.

You have completed the installation of the AJ-6000 series software.

If Acrobat Reader is not installed in your computer, install it following the steps
below.
1)

Click the "Display of online manual" button.
The screen shown below will be displayed.

2)

Click the "Yes" button.
The installation of Acrobat Reader will start.
Follow the on-screen instructions to install Acrobat Reader.

If any error message appears, solve the problem following the instructions on the
screen. After your problem is solved, the installing procedure will be continued. 
Depending on your problem, you may have to exit the installer. In this case, click
the "Cancel" button to exit the installer. After solving your problem, reinstall the
software from the beginning.

After the installation, a message to restart your computer may be displayed. In this
case, click the "Yes" button to restart your computer.

After installing the AJ-6000 series software, install the printer driver referring to the
next page.

Summary of Contents for AJ-6020






























































































Reviews:

No comments