15
INSTALLING THE PRINT HEADS AND THE INK TANKS
9
Lower the print head latch.
Lower the latch until it clicks into the latched position.
10
Unpack the ink tanks from their protective wrapping and slowly
remove the tape.
11
Turn the ink tanks upside down, and then immediately insert
each of them to the print head of the corresponding number.
!
Hold the ink tank upright when removing the tape. Do not touch the uncovered
opening on the ink tank, as ink will get on your hands.
!
Ensure that there are no pieces of tape remaining on the ink tank.
Ensure the number on each print head corresponds to the number on each ink
tank.
Make sure that each tab
securely locks the ink tank
by pressing here.
Properly align the tab
when inserting the ink tank.
Match the ink tank number
to the print head number.
Do not touch this area.
The unit may not copy
if it is dirty.