manualshive.com logo in svg

Sharp AJ-6020, Operation Manual, Page: 27 / 93

Share
Download
Sharp AJ-6020 Operation Manual Download Page 27

25

INSTALLING THE SOFTWARE

This chapter provides you with information on how to install required software to use this
unit with your computer. Information on how to use the Online Manual is also provided.
The following terms are used in this chapter.

CD-ROM
Means the supplied CD-ROM with the AJ-6000 Series Software.
Drive D (the field to be typed "D:\...")
This assumes that your computer's CD-ROM drive is drive D.
(If your computer's CD-ROM drive letter is not Drive D, change the CD-ROM drive letter to 
correspond to the letter of your CD-ROM drive.)

SOFTWARE FOR THE AJ-6000 SERIES

The supplied CD-ROM includes software for this unit. To install the software onto your
computer, see the next page.

Sharpdesk

Utility software integrating a variety of user software.

Utility Software

Button Manager

Utility software enabling the "Scan" button located on the unit.

Copy JX2

Utility software allowing you to conduct simple editing procedures on a scanned
original.

Driver software

AJ-6000 series driver

Driver software is the basic driver which lets you connect this unit and your
computer to operate the unit.

SHARP TWAIN driver

Permits you to operate scanning function of this unit with TWAIN-compliant
application.

Printer driver

Enables you to use the printer function of this unit with your computer.

BONUS SOFTWARE

PhotoSuite III SE

Summary of Contents for AJ-6020






























































































Reviews:

No comments