Scroll to the “Print file” menu item and click. This will get you into the top level directory
of the SD card.
The odd little symbol you see to the left of the directory names are actually little folder
icons. This simply helps separate the directories from g-code and other files on the SD card.
Click the “GCODE” directory to see a list of the files included.
For this first print, go ahead and click on the file, “BLINKY.GCO”.
When you select the file name, the LCD controller will make a “chirping” sound and the
heated bed will begin to heat up. Once the bed has reached its target temperature, the printer
will home all three axes and then the hot end will begin its heating process. Once that has
completed, the printer should begin the print.
35
