Introduction – Read Me First!
This document is your instruction manual for your new SeeMeCNC® 3D printer machine.
Before using your new 3D printer, thoroughly read and understand this manual for safe and
effective operation of the machine.
2
Warning
Adult supervision required. Children under 18 years of age require supervision.
Risk of Fire. Do not leave machine unattended.
Use genuine parts manufactured or designated by SeeMeCNC.
Keep a copy of this manual near the machine, easily accessible to all operators.
Use of this machine is at your own risk.
Personal property damage, serious injury or death can result from not following
instructions or warning in the manual or misuse of the machine.
Automatic machine can start unexpectedly. Pay close attention and keep clear
while power is connected to the machine
The machine power supply is connected to AC voltage
and can be hazardous. Disconnect power before
servicing this machine.
The hot end of the machine can reach very high
temperatures of 700F and can cause serious burns.
The heated print surfaces (heated bed) can also reach
temperatures high enough to cause severe burns. Allow
both to cool for 20 minutes after turning off power.
Use caution near moving parts of the machine. Keep
body and loose articles clear.
Poisonous gas, smoke, or fumes could be emitted by some materials you could
use with the machine. In such case, you should install ventilation.
Choking Hazard. This machine contains small parts and
can produce small parts which can be a choking hazard
to children.
Visit
http://www.seemecnc.com
to contact us if you have any questions.
