Leveling your new Orion Delta™ 3D Printer (The Easy Way!)
Sometimes the abuse the Orion can experience during shipping can adversely effect the
factory calibration. If that's the case with your printer, you can use this easy to follow guide in
order to re-calibrate your Orion. This procedure was written by the gentleman that built and
calibrated your printer, so there literally is no more authoritative source for the process.
1) Preheat hot-end and bed to the material you use. If you use both, just use the “Preheat ABS”
in the printer settings menu on the LCD.
2) Once the hot-end and bed are up to temp, on the LCD, click the knob to bring up the menu,
go to Advanced Settings (at the bottom of the list). Click the knob.
3) Go to the bottom of the next menu to Calibrate Z Height. Click the knob.
27
