Now that you've got MatterControl open, you need to tell it about the Orion so you can start
printing! Click on “File” and then “Add Printer”. The following dialog will open:
This is where you can manage all your
different printer configurations. Click the “Add” icon
as indicated by the blue arrow.
Clicking on the
Add
icon will
open up the 3D Printer Setup dialog.
Here is where you'll name the new
printer configuration and where you
select your printer model.
So go ahead and enter a printer
name and then chose “Orion” from the
Select Model
list. Once you've done
this, the
Save & Continue
button will
appear at the bottom left corner of the
window. Click on it to save your new
printer configuration.
41
