SeeMeCNC orion delta User Manual Download | Manualshive

Page: 104 / 104

background image

pt5mmx20mm-cylinder.stl

http://forum.seemecnc.com/download/file.php?id=8209

pt6mmx20mm-cylinder.stl

http://forum.seemecnc.com/download/file.php?id=8210

Highcooley's Onyx Bed Leveling Aid

is a great one to test your calibration. Highly

recommended. If you can print it perfectly you've "arrived". I couldn't find a similar thing for the
Orion. If you know of one, let me know and I'll add it.

texsc98 took the challenge and created a

parametric version

that has defaults for Orion.

Layer Tuning

You can use this set of files in a number of ways - everything from testing calibration

results to exploring slicer options to breaking in a new filament. These are designed for a .2mm
layer height.

The first cylinder (pt2mm tall) I call the Simple Single Layer Test and is my workhorse

calibration object for tuning first layer adhesion issues, profiling new filaments and host of other
uses. It is one layer high and can be used to test adhesion to the bed and first layer thickness
(measure it with a micrometer or calipers and compare to what the first layer height was
supposed to be). You can use this to tune your printer and slicing parameters to get perfect infill
and explore the effects of speed on infill quality without wasting a lot of time and filament
printing larger parts poorly. I also use it when I am testing a new filament to dial it in. It's a really
versatile tool and I use it every day.

75mmDisk-pt2mmtall.stl

http://forum.seemecnc.com/download/file.php?id=8475

This cylinder is .4mm tall, or two layers. It can also be used similar to the first cylinder

but the second layer will show issues in orthogonal movements to the first layer. It also provides
a little more thickness to measure to verify layer height. It can also help tune the top capping
layer.

75mmDisk-pt4mmtall.stl

http://forum.seemecnc.com/download/file.php?id=8476

The last cylinder is .6mm tall, or three layers. Again, it can be used like the first two. I

don't use it as often.

75mmDisk-pt6mmtall.stl

http://forum.seemecnc.com/download/file.php?id=8477

104

«
...
102
103
104

Summary of Contents for orion delta









































































































Reviews:

No comments

Related manuals for orion delta

Brand: Samsung Pages: 9

Bixolon SRP-500

Brand: Samsung Pages: 27

550N - CLP Color Laser Printer

Brand: Samsung Pages: 288

2 COLOR THERMAL PRINTER SRP-275

Brand: Samsung Pages: 8

Brand: Samsung Pages: 6

Brand: Samsung Pages: 91

JG Titan MKII V2

Brand: iBox Pages: 5

Brand: Oki Pages: 6

Brand: Oki Pages: 32

Brand: Oki Pages: 52

Brand: Oki Pages: 64

Brand: Oki Pages: 269

Brand: Oki Pages: 2

Brand: Oki Pages: 32

Brand: Oki Pages: 33

Brand: Oki Pages: 8

Brand: Oki Pages: 101

Brand: Oki Pages: 104

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands