9) Go to Home Towers. Click the knob. You have now set the z height, and now it is time to
calibrate the towers.
10) Using the selector knob on the Orion, scroll to the
Select File
menu option and choose the
CALIBRATIONS
sub-directory:
Then chose the
TOWERS.GCO
file:
This will run the tower calibration routine. Watch closely as the machine will home, then
the nozzle will drop to 0.2mm ABOVE the glass. The gap will look like the following image.
After it drops to the center position, it will travel to the X tower. DO NOT pay attention to
what the nozzle does while traveling, what you must pay attention to is when it pauses.
29
