SeaSpace TeraScan 1.5M, Operation And Maintenance Manual

Page: 194 / 232

178
SeaSpace Corporation
^0000
Gyro mode: When the antenna shipheading changes, the antenna
moves to match the change. Use only with sea-going
antenna when tracking a pass. See Section 4.5,
page 81.
^0005 Reset all trim values to 0 (N4000, N5000, N6000)
^0004
Cross-level trim: Tip cross-level beam left by 0.4833
º.
Changes N4___.
^0006
Cross-level trim: Tip cross-level beam right by 0.4833
º.
Changes N4___.
^0002
Elevation trim: Tip level cage away from dish by 0.4833
º.
Changes N5___.
^0008
Elevation trim: Tip level cage toward dish by 0.4833
º
.
Changes N5___.
^0067 Toggle dish scan on/off. Not used.
^0070 Set PCU to Fast Reference mode.
^0071
Satellite Ref Mode: The antenna does not move when the shipheading
changes. Used only with sea-going antenna when
antenna is idle.
^0087 Write PCU NVRAM.
^0090 Reset (initializes) the PCU.
Note: All changes must be followed by an NVRAM write (
ac 1 NVRAM
).