manualshive.com logo in svg

SeaSpace TeraScan 1.5M, Operation And Maintenance Manual

The SeaSpace TeraScan 1.5M Operation and Maintenance Manual is available for download for free from manualshive.com. This manual provides detailed instructions on operating and maintaining this advanced satellite imaging system. Download the manual today to ensure optimal performance of your SeaSpace TeraScan 1.5M.

Share
Download
background image

TeraScan 1.5m Polar Satellite Tracking Antenna O & M Manual

99

Section 8: Antenna Repair 

Procedures

8.1 Tools for the Repair of Antenna Components..............................................................................  100
8.2 Spare Parts .........................................................................................................................................  102

8.2.1 1.5m Spares Kit [SPR-15-BASIC (Rev A)/70416511] 6003AL, 
           Servo Amplifiers Inside PCU, with Sk-II GPS .................................................................... 102
8.2.2 1.5m Spares Kit [SPR-15-BASIC (Rev B)/70416810] 6003AL, 
           Servo Amplifiers Inside PCU, with Acutime Gold GPS ................................................... 103
8.2.3 1.5m Spares Kit [70416501] 6003L, Separate Servo Amplifiers, 40:1 Azimuth Train .... 104
8.2.4 Other Spare Parts Not in Kits ................................................................................................ 105

8.3 Packaging of Parts for Return Shipment to SeaSpace..................................................................  106
8.4 Replacement Procedures..................................................................................................................  107

Antenna Components

8.4.1 Pedestal Control Unit (PCU) [12574548] [12574549] .......................................................... 107
8.4.2 Axis Drive Motors [12574501] [12574505] [12574506] [12574507] .................................... 114
8.4.3 Servo Amplifier [12574003] 6003L Only .............................................................................. 122
8.4.5 Level Platform (Level Cage) [12574644][12574544]............................................................ 124
8.4.6 Level Platform (Level Cage) Drive Motor [12574035] ....................................................... 126
8.4.7 Antenna Power Supply [12217001] [12217002] [PWR-220-SEA]...................................... 128
8.4.9 Azimuth Pot [12574510], 6003L Only ................................................................................... 130
8.4.10

Interface Harness [70096105] [70096106].......................................................................... 132

8.4.20

L/S Feed/LNA/ Downconverter [12218xxx] ................................................................. 136

8.4.21

DC Power Injector [12791001]............................................................................................ 138

Antenna Drive Belts

8.4.31

Cross-Level Drive Belt [12574520]..................................................................................... 140

8.4.32

Elevation Drive Belt [12573613]......................................................................................... 142

8.4.33

Azimuth Pot Drive Belt [12574524] 6003L Only.............................................................. 144

8.4.34

Level Platform Drive Belt [12573614] / [12574526] ........................................................ 146

8.4.35

Azimuth Drive Belts [12574521] and [12574523]; [12574525] ........................................ 148

8.5 Calibration and Adjustment Procedures.......................................................................................  152

8.5.1

Balancing the Antenna........................................................................................................ 152

8.5.10

Reading PCU "N" Coefficients........................................................................................... 153

8.5.11

Entering PCU "N" Coefficients .......................................................................................... 155

8.5.12

Calibration of the Level Platform...................................................................................... 156

8.5.13

Azimuth Pot Calibration (6003L only) ............................................................................. 157

8.5.20

Alignment of the Antenna Using pass reception, align and trackeye ......................... 158

8.6 GPS Receiver and Antenna [70170101] (Separate Receiver and Antenna, Sk-II) ..................... 159

8.6.1 Theory of Operation ............................................................................................................... 159
8.6.2 Stand-alone GPS Receiver [70320001] .................................................................................. 160
8.6.3 Stand-alone GPS Antenna [70347001] ................................................................................. 161

8.7  GPS Receiver and Antenna [12120004] (One Assembly, Acutime Gold) ................................... 162

8.7.1  Theory of Operation ................................................................................................................ 162
8.7.2  Stand-alone GPS Receiver and Antenna [70320004]........................................................... 163

Summary of Contents for TeraScan 1.5M









































































































































































































































Reviews:

No comments

Related manuals for TeraScan 1.5M

Maclean MCTV-970 Quick Start Manual preview
MCTV-970
Brand: Maclean Pages: 3
Panorama Antennas LPA-7-42 Series Installation Instructions preview
LPA-7-42 Series
Brand: Panorama Antennas Pages: 2
Camec KING OMNI PRO 053225 Installation And Operating Instructions preview
KING OMNI PRO 053225
Brand: Camec Pages: 4
Radio Shack TV FM High Gain Mast-Mount Antenna UHF/VHF/FM Amplifier with Switchable FM... User Manual preview
TV FM High Gain Mast-Mount Antenna UHF/VHF/FM Amplifier with Switchable FM...
Brand: Radio Shack Pages: 8
Icom IC-AH1 Instruction Manual preview
IC-AH1
Brand: Icom Pages: 15
Gotting HG G-71450-A Manual preview
HG G-71450-A
Brand: Gotting Pages: 78
Cocoon HE170351 Instruction Manual preview
HE170351
Brand: Cocoon Pages: 9
CommScope DB224 Instruction Sheet preview
DB224
Brand: CommScope Pages: 4
SteppIR DB18E Yagi Assembly Manual preview
DB18E Yagi
Brand: SteppIR Pages: 80
RCA ANT1000 - Digital Flat Passive Ultra-Slim-Profile Antenna Assembly And Usage Instructions preview
ANT1000 - Digital Flat Passive Ultra-Slim-Profile Antenna
Brand: RCA Pages: 2
Gost GMM-NT Installation Manual preview
GMM-NT
Brand: Gost Pages: 2
Oehlbach Scope Max User Manual preview
Scope Max
Brand: Oehlbach Pages: 24
Offel PO 150 G series User Manual preview
PO 150 G series
Brand: Offel Pages: 9
EBDS SD 3000 U Installation Manual preview
SD 3000 U
Brand: EBDS Pages: 2
camping first Satmex Flat 2 User Manual preview
Satmex Flat 2
Brand: camping first Pages: 44
MFJ MFJ-1795W Instruction Manual preview
MFJ-1795W
Brand: MFJ Pages: 16
D-Link ANT24-1800 User Manual preview
ANT24-1800
Brand: D-Link Pages: 34
Advanced Navigation Poseidon Reference Manual preview
Poseidon
Brand: Advanced Navigation Pages: 12

Brands by name

Popular brands

Load more brands