manualshive.com logo in svg

SeaSpace TeraScan 1.5M, Operation And Maintenance Manual

The SeaSpace TeraScan 1.5M Operation and Maintenance Manual is available for download for free from manualshive.com. This manual provides detailed instructions on operating and maintaining this advanced satellite imaging system. Download the manual today to ensure optimal performance of your SeaSpace TeraScan 1.5M.

Share
Download
background image

TeraScan 1.5m Polar Satellite Tracking Antenna O & M Manual

ix

7.2.4.4  Sea-Going Antenna with NMEA 0183 Input—

       Azimuth Mispositioned   ......................................................................... 97

7.2.5  RF-Related Faults ................................................................................................. 98

7.2.5.1  L/S-Band Downconverter ........................................................................ 98

7.2.6  Time-Related Faults ............................................................................................. 98

7.2.6.1  Check/reset clock....................................................................................... 98
7.2.6.2  Check GPS with sunclock and whereami............................................... 98

Section 8:  Antenna Repair Procedures..........................................................99

8.1  Tools for the Repair of Antenna Components.......................................................... 100
8.2  Spare Parts ..................................................................................................................... 102

8.2.1  1.5m Spares Kit [SPR-15-BASIC (Rev A)/70416511] 6003AL, 

Servo Amplifiers Inside PCU, with Sk-II GPS .................................................. 102

8.2.2  1.5m Spares Kit [SPR-15-BASIC (Rev B)/70416810] 6003AL, 

Servo Amplifiers Inside PCU, with Acutime Gold GPS.................................. 103

8.2.3  1.5m Spares Kit  [70416501] 6003L, Separate Servo Amplifiers, 

40:1 Azimuth Train ............................................................................................... 104

8.2.4  Other Spare Parts Not in Kits  .......................................................................... 105

8.3  Packaging of Parts for Return Shipment to SeaSpace ............................................. 106
8.4  Replacement Procedures ............................................................................................. 107

8.4.1  Pedestal Control Unit (PCU) [12574548] [12574549] ..................................... 107
8.4.2  Axis Drive Motors [12574501] [12574505] [12574506] [12574507] ............... 114
8.4.3  Servo Amplifier [12574003] 6003L Only ......................................................... 122
8.4.4  Level Platform (Level Cage) [12574644][12574544] ...................................... 124
8.4.5  Level Platform (Level Cage) Drive Motor [12574035]................................... 126
8.4.6  Antenna Power Supply [12217001] [12217002] [PWR-220-SEA] ................. 128
8.4.7  Azimuth Pot [12574510], 6003L Only .............................................................. 130
8.4.8  Interface Harness [70096105] [70096106] ........................................................ 132
8.4.9  L/S Feed/LNA/ Downconverter [12218xxx] ................................................ 136
8.4.10  DC Power Injector  [12791001] ....................................................................... 138
8.4.11  Cross-Level Drive Belt  [12574520] ................................................................ 140
8.4.12  Elevation Drive Belt  [12573613]..................................................................... 142
8.4.13  Azimuth Pot Drive Belt  [12574524] 6003L Only ......................................... 144
8.4.14  Level Platform Drive Belt [12573614] / [12574526] ..................................... 146
8.4.15  Azimuth Drive Belts [12574521] and [12574523]; [12574525]..................... 148

8.5  Calibration and Adjustment Procedures................................................................... 152

8.5.1  Balancing the Antenna....................................................................................... 152
8.5.2  Reading PCU "N" Coefficients.......................................................................... 153
8.5.3  Entering PCU "N" Coefficients ......................................................................... 155
8.5.4  Calibration of the Level Platform..................................................................... 156
8.5.5  Azimuth Pot Calibration (6003L only) ............................................................ 157
8.5.6  Alignment of the Antenna Using pass reception, align and trackeye ........ 158

8.6  GPS Receiver and Antenna [70170101] (Separate Receiver and Antenna, Sk-II) 159

8.6.1  Theory of Operation........................................................................................... 159
8.6.2  Stand-alone GPS Receiver [70320001] ............................................................. 160
8.6.3  Stand-alone GPS Antenna [70347001]  ............................................................ 161

8.7  GPS Receiver and Antenna [12120004] (One Assembly, Acutime Gold) ............. 162

8.7.1  Theory of Operation........................................................................................... 162
8.7.2  Stand-alone GPS Receiver and Antenna [70320004] ..................................... 163

Summary of Contents for TeraScan 1.5M









































































































































































































































Reviews:

No comments

Related manuals for TeraScan 1.5M

KVH Industries TracPhone V3IP Installation Manual preview
TracPhone V3IP
Brand: KVH Industries Pages: 47
Winegard Carryout GM-1599 Manual preview
Carryout GM-1599
Brand: Winegard Pages: 9
Iridium Pilot TPIM1301 Installation Manual preview
Pilot TPIM1301
Brand: Iridium Pages: 70
Hi-Z Antennas 4-8 PRO Manual preview
4-8 PRO
Brand: Hi-Z Antennas Pages: 15
Honeywell GSM-ANT Technical Support Help Doc preview
GSM-ANT
Brand: Honeywell Pages: 2
NETGEAR ANT24D18v2 Installation Manual preview
ANT24D18v2
Brand: NETGEAR Pages: 12
Intellian GX60 Installation And Operation User Manual preview
GX60
Brand: Intellian Pages: 141
EnGenius EP-801-OUT-LLC400-10 Quick Installation Manual preview
EP-801-OUT-LLC400-10
Brand: EnGenius Pages: 2
CommScope CMAX-DMF4-43-Wi53 Installation Manual preview
CMAX-DMF4-43-Wi53
Brand: CommScope Pages: 5
Norsat Sinclair StealthWave SHA211 Installation Manual preview
Sinclair StealthWave SHA211
Brand: Norsat Pages: 5
Norsat WAYFARER 1.2M KA-BAND User Manual preview
WAYFARER 1.2M KA-BAND
Brand: Norsat Pages: 29
Norsat WAYFARER 1.0M KU-BAND User Manual preview
WAYFARER 1.0M KU-BAND
Brand: Norsat Pages: 32
C-COM Satellite iNetVu Service Manual preview
iNetVu
Brand: C-COM Satellite Pages: 109
Hy-Gain MK-80 Instruction Manual preview
MK-80
Brand: Hy-Gain Pages: 4
Hy-Gain GPG-1B Instruction Manual preview
GPG-1B
Brand: Hy-Gain Pages: 3
Steren ANT-XTREME V2.1 Instruction Manual preview
ANT-XTREME V2.1
Brand: Steren Pages: 2
Steren COM-830 Quick Manual preview
COM-830
Brand: Steren Pages: 3
Steren GPS-050 User Manual preview
GPS-050
Brand: Steren Pages: 9

Brands by name

Popular brands

Load more brands