76
TSA-SA70 OWNER’S MANUAL
3
4
5
6
Use a 10mm wrench to loosen the
two hex head bolts securing the angle
guide rail to the sliding table.
Slide the angle guide rail to align
the front hole in the miter detent pin
positioning bracket (the 90 degree
hole) with the miter detent pin in the
fence lock assembly. The miter angle
ruler may not be aligned with the
crosscut fence at this point, but it will
be adjusted in step 6.
Re-tighten the hex head bolts to lock
the angle guide rail in place.
Tighten the lock handle and the
miter lock handle on the fence lock
assembly to lock the crosscut fence in
place.
WITH
WITHOUT
EXTENSION WING
OR