62
TSA-SA70 OWNER’S MANUAL
8
9
10
11
Position the fence pivot assembly
(O)
next to the straight end of the
crosscut fence
(C)
(the left end), with
the lock handle on the left.
Align the T-nut in the fence pivot
assembly
(O)
with the left end of the
T-slot. If necessary, loosen the T-nut
to provide clearance for the walls of
the crosscut fence
(C)
.
Slide the T-nut about 12” into the
T-slot. Use the lock handle to lock
the fence pivot assembly
(O)
in place.
Position the crosscut fence
(C)
at
the rear of the sliding table
(M)
, with
the smooth face of the crosscut
fence facing towards the front of
the saw, and the beveled end of the
crosscut fence extending away from
the table saw.
O
C
C
P
O
C
M
WITH
WITHOUT
EXTENSION WING
OR
