19
TSA-SA70 OWNER’S MANUAL
Attaching the Large Sliding Table Mounting Bracket
For installations WITH the extension wing.
Requires:
Hardware Bag 2 (p.4)
Two 13mm Wrenches
1
2
Position the mounting bracket
(E)
next to the left edge of the
left extension wing and align the
mounting holes in the side of the
mounting bracket with the holes in
the side of the extension wing. See
Fig. 1 for ICS, or Fig. 2 for PCS.
Fig. 1
With the mounting holes aligned,
and the top of the mounting bracket
(E)
about 1/16” below the top
surface of the extension wing, insert
a hex head bolt
(1.37)
through a
washer
(1.7)
, then through one of
the exposed holes in the mounting
bracket
(E)
and the extension wing.
Secure the bolt in place with a
second washer
(1.7)
and a lock nut
(1.39)
. Only finger tighten the nut at
this time.
E
E
Fig. 2
E
E
E
UNDER TABLE VIEW
EXTENSION WING
WITH EXTENSION WING
1.37
1.7
1.7
1.39
