27
TSA-SA70 OWNER’S MANUAL
8
9
Tighten the four bolts using a 13mm
wrench.
Mount the front guide bearing bracket
(J)
to the underside of the front of the
inner guide tube
(A)
using two hex
head bolts
(1.11)
and two washers
(1.10)
. Use a 13mm wrench to tighten
the bolts.
J
WITH
WITHOUT
EXTENSION WING
OR
6
Adjust the leveling foot
(1.14)
in
the support leg
(F)
as necessary
to ensure the inner guide tube
(A)
is level, then use a 13mm wrench
to tighten the hex nut
(1.13)
on the
leveling foot
(1.14)
.
7
Use a tape measure or calipers to
make sure the inner guide tube
(A)
is
fairly parallel with the main table or
extension wing. For reference, the
gap between the inner guide tube
and the table/wing is approximately
31mm.
F
A
A
A
1.14
1.13
1.11
1.10
