45
TSA-SA70 OWNER’S MANUAL
4
Place the washer
on the shaft of the
bolt and secure it loosely in place
with the lock nut.
5
6
7
Slide the guide bearing assembly
(N)
towards the outer guide tube
(B)
until the bearing sits under the outer
guide tube, but the bracket portion
of the guide bearing assembly does
not press against the outer guide
tube.
Use a 10mm wrench or socket
wrench to tighten the lock nut on the
hex head bolt.
Use a 10mm wrench to loosen the
lock nut securing the ball bearing
in the guide bearing assembly
(N)
and slide the bearing up or down in
the slotted hole in the bracket until
the ball bearing just contacts the
underside of the outer guide tube
(B)
. Then re-tighten the lock nut.
B
B
N
N
WITH
WITHOUT
EXTENSION WING
OR
