58
TSA-SA70 OWNER’S MANUAL
14
Slide the crosscut fence extension
(R)
all the way onto the crosscut fence
extension tube, with the flat face of the
crosscut fence extension facing the
same direction as the tab on the end of
the crosscut fence extension tube.
15
Position the crosscut fence extension
(R)
and crosscut fence extension tube
at the far left side of the crosscut
fence
(C)
(away from the table saw),
so the flat face of the crosscut fence
extension lines up with the flat face of
the crosscut fence.
16
Slide the hollow end of the crosscut
fence extension tube all the way into
the left end of the crosscut fence
(C)
,
until the edge of the crosscut fence
extension is flush with the crosscut
fence.
C
C
WITH
WITHOUT
EXTENSION WING
OR
17
Thread a thumb screw
(3.5)
into
each of the two threaded holes on
the face of the crosscut fence
(C)
adjacent the crosscut fence ruler
and into the hole in the crosscut
fence extension, until they contact
the crosscut fence extension tube
and secure it in place. Do not over-
tighten the thumb screws.
C
R
R
3.5
