56
TSA-SA70 OWNER’S MANUAL
7
8
9
Align the rectangular T-nut
(2.10)
in the fence lock assembly
(Q)
with the left end of the T-slot. If
necessary, loosen the T-nut to
provide clearance for the walls of
the crosscut fence
(C)
.
Slide the T-nut about 18” into the
T-slot. Do not tighten the miter lock
handle or the lock handle in the
fence lock assembly
(Q)
at this time.
Roll the crosscut fence
(C)
forward,
so the crosscut fence ruler faces
up and the fence pivot assembly
(O)
and fence lock assembly
(Q)
are
on the side of the crosscut fence
closest to the front of the table saw.
C
Q
Q
C
10
Slide the bottom of the fence pivot
pin into the fence pivot plate at the
front of the sliding table. Use the
lock handle in the fence pivot plate
to secure the fence pivot
assembly
(O)
.
O
WITH
WITHOUT
EXTENSION WING
OR
2.10
O
Q
FENCE
PIVOT PIN
FENCE
PIVOT PLATE
