30
TSA-SA70 OWNER’S MANUAL
4
5
6
Align the mounting holes in the end
of the support tube
(K)
with the
single mounting hole in the bottom
surface of the cabinet mounting
bracket
(1.47)
.
With the mounting holes aligned,
insert a hex head bolt
(1.44)
through
a washer
(1.10)
, then through
the exposed holes in the cabinet
mounting bracket
(1.47)
and support
tube
(K)
, and then through a second
washer
(1.10)
and a lock nut
(1.39)
.
Do not fully tighten the lock nut at
this time.
Pivot the cabinet mounting bracket
(1.47)
toward the rear of the saw
cabinet within the area shown. Use a
level to make sure the support tube
(K)
is level.
K
K
K
WITH
WITHOUT
EXTENSION WING
OR
1.47
1.47
1.47
1.44
1.10
1.10
1.39
Position the mounting bracket only within
the area shown: a 6.5” x 4.5” area under
the rear rail in the upper-right corner of
the saw cabinet. Ensure the support tube
(K) is level before attaching the mounting
bracket (1.47).
i
