21
TSA-SA70 OWNER’S MANUAL
For installations WITHOUT the extension wing.
Requires:
Hardware Bag 2 (p.4)
13mm
Wrench
1
2
Position the mounting bracket
(E)
on
the left edge of the saw table and
align the mounting holes. See Fig. 1
for ICS, or Fig. 2 for PCS.
For ICS saws ONLY:
With the
mounting holes aligned, and the
top of the mounting bracket
(E)
about 1/16” below the top surface
of the table, use the original wing
hardware to attach the mounting
bracket. Insert the bolt through the
lock washer, through the mounting
bracket
(E)
and into the table. Only
finger tighten the bolt at this time.
Fig. 1
Fig. 2
E
E
E
WITHOUT EXTENSION WING
ORIGINAL
WING
HARDWARE
