53
TSA-SA70 OWNER’S MANUAL
6
Slide the T-nut
(2.10)
into the front
end of the T-slot in the bottom of the
angle guide rail
(D)
. Slide the lock
handle and T-nut along the angle
guide rail to the threaded hole in the
rail and thread the lock handle into
the hole. This lock handle secures
the table position handle.
DO NOT OVER-TIGHTEN THE LOCK HANDLE. SECURING THE TABLE
POSITION HANDLE DOES NOT REQUIRE MUCH CLAMPING FORCE, AND
OVER-TIGHTENING THE LOCK HANDLE CAN LEAD TO WARPING OR
SCRATCHING.
D
7
Thread the remaining two
lock handles
(2.11)
into the fence
miter pivot plates on the front and
rear of the sliding table
(M)
. Use
the ratchet capabilities of the lock
handles to make sure the handles
are generally horizontal so they do
not interfere with the travel of the
sliding table.
M
M
WITH
WITHOUT
EXTENSION WING
OR
2.11
2.11
2.11
