37
TSA-SA70 OWNER’S MANUAL
Installing the Outer Guide Tube
For installations WITH OR WITHOUT the extension wing.
Requires:
Hardware Bag 2 (Leftover hardware) (p.4)
13mm
Wrench
1
2
3
Position the outer guide tube
(B)
on
the lower “step” of the stepped leg
brackets
(H)
, with the wider polished
surface and small hole in each end
of the outer guide tube facing in
towards the saw.
Align the mounting holes in the
lower “steps” of the stepped leg
brackets
(H)
with the threaded holes
in the bottom of the outer guide
tube
(B)
.
With the mounting holes aligned,
insert a hex head bolt
(1.37)
through
a washer
(1.10)
(both leftover from
Hardware bag 2), through one of the
exposed mounting holes in one of
the stepped leg brackets
(H)
, and
then into the threaded hole in the
bottom of the outer guide tube
(B)
.
Repeat step 2 for the other exposed
hole in the stepped leg bracket
(H)
and outer guide tube
(B)
. Move to
the other stepped leg bracket and
repeat the process. Tighten the
bolts using a 13mm wrench.
B
H
H
B
B
H
H
WITH
WITHOUT
EXTENSION WING
OR
1.10
1.37
